![]() Support SD/SDHC/SDXC card up to spec 3.0 capacity up to 2TBĦ. Support 3.3 V /5V ATA flash card interfaceĥ. Support Type I/II ATA flash PCMCIA card(please be noted that the reader does not support any I/O card, Linear Flashcard, or SRAM card)Ĥ. Support USB 3.0 and USB mass storage device classģ. Please be noted that the USB connection should be removed before adjusting the switch.ġ. The default setting is 3.3V if the ATA card can not be identified with 3.3V interface, please switch to 5V and try again. The ATA card interface pf the reader supports 3.3V or 5 V, which is determined by the switch on the rear panel. Installation completes insert the flash card into the reader and the data within can be accessed. OS will automatically identify the device and install proper driver.Ĥ. Connect the reader to the USB 3.0/2.0 port of PC with the USB cable.ģ. Note: Does not support any I/O card, Panasonic P2 card, Linear Flashcard, or SRAM card)Ģ.
0 Comments
Leave a Reply. |